Since the roof plays a pivotal role in protecting you and your home from the adversities and harshness of weather, it surely requires special attention. Hence, you should be concerned about its overall condition and performance. But how you should know what type repairs your roof might need. To assist you in this regard, here are the 5 common shingle roofing repairs that your roof may require to keep it in good shape and enhance its performance.
Look for Damaged or Clogged Gutters
In fact, faulty gutters may also serve as a cause of damaging your roof. If you don’t clean the gutters by removing debris or standing water, it would lead to causing serious damage to the roof and walls of your home. Even if you keep the gutters clean, they need to be repaired after a few years to maintain their functionality.
Replace Missing or Cracked Shingles
Shingles not only protect your roof, but they also give a nice appearance to your home. Hence, when it comes to replacing the shingles, you are actually protecting the roof as well as maintaining the looks of your home. Shingles are not tough enough to bear the harsh weather conditions like heavy snow of windstorm. Hence, it’s likely to find some of these to be missing every now and then.
When shingles are damaged, you need to replace them immediately to avoid water destroying the roof and interior of your home. In case of roof leaks, you may have to repaint the roof from inside. Buckling and curling are some of the issues that you can easily identify by just looking at the roof. You need to replace the shingles to prevent further damage.
Take Care of Fascia
Most of the homeowners are not familiar with this term, but they probably have seen it. It is a more sophisticated name for roof trim. It actually runs along the roofline of your home, designed to stop the water from entering your home. For most of the time it is exposed to severe weather conditions; hence start to exhibit signs of damage after a few years. So, you should monitor its condition at least twice a year.
It is a finished surface located below the rafters and fascia. Soffits play a key role when it comes to attic ventilation. Moreover, it helps to prevent your rafters and sheathing from rotting. This structure is normally constructed from vinyl, which makes it a perfectly resistant against water. When inspecting soffits, you should look for minor cracks or holes that may cause water to seep into the roof.
Flashings also Need your Attention
Flashings act as an effective sealant, which protects those parts of a roof that are not covered. These may include walls, roof edges or drains. Apart from these areas, flashings also protect some other parts of the roof from water seepage. When inspecting the flashings, look for rust or any loose areas that can allow water to seep into the interior. Although it is quite easy to get them repaired, you should try to contact an experienced roofing contractor to complete the task professionally.
Before winter comes, you need to get your roof inspected by a reliable roofing contractor to identify any minor damages or cracks. If you fail to do so, your home might suffer severe damage due to heavy snow, rain or any other natural calamity. So, is your roof (is)strong enough to bear the adversities. If not, think about repairing it before this winter.
In fact, minor repairs cost less than replacing the roof (in case) unless it has been destroyed completely. Nevertheless, you must consider hiring a professional roofing contractor for this task. It has been usually observed that when homeowners try to inspect the roof by themselves, they failed to identify the minor issues that may turn into big disasters. Hence, let the professionals handle this job for ensuring the high-end performance of your roof for upcoming winter season.
Replacing the Damaged or Missing Shingles
Shingles are the most delicate part of a roof, which exhibit the early signs of wear and tear due to intense exposure to sun, wind, snow and rain. When you notice that a considerable number of shingles are missing, it’s a warning that you shouldn’t ignore. This may result in water leakage, causing a threat to the interior. So to avoid any damage to the roofing structure, it is advised to contact a reputed roofing contractor and get your roof inspected before the winter sets in.
Make Sure the Roof is Properly Sealed
Your roof needs to be sealed, especially around the places like chimneys, plumbing stacks, satellite mounts, and flashings. The sealant offers effective protection against seepage or leaks. However, after due course of time, sealant becomes ineffective due to the appearance of cracks. So by adding sealant at required places can restore the efficiency of your roof against leaks. Although it is a simple task, you should only settle for highly skilled professionals to complete this task.
Timely Repair the Roof Gutters
There are numerous reasons for gutters to sag including heavy snow, poor installation or routine wear and tear. Apart from lowering the curb appeal of your home, sagging gutters may also prove detrimental to the integrity of your roof. This issue can cause structural damage to the roof, minimizing its efficiency to perform well during the winter.
Although your roof gutters appear to be in a perfect condition, it is advised to get them inspected by a professional roofer. What you couldn’t notice is a pile of leaves, sticks and other debris, which is obstructing the path for rainwater or melted snow. If you leave it this way, possibilities are there that the water would start seeping into the walls, causing a serious threat to the interior. To avoid the menace of leaky gutters, get them cleaned thoroughly by hiring a reliable roofing contractor.
Besides fixing exterior issues, roofers also do attic inspection as a part of their job. There are certain roof problems that are hard to detect from outside; hence, roofers need to look for them through attic inspection. By doing so, they try to identify the holes, poor insulation, and signs of water damage. If one or more of these issues are detected, they must be fixed immediately to avoid causing major damage to the roof.
Roof is an essential aspect of your home’s structural integrity and if it isn’t protected by a warranty, you better prepare for bearing the heavy cost of replacing it. This is so, as replacing your defective roof wouldn’t be a cheap affair. The cost may easily settle for five-figures when taking into consideration the pitch, the size, and the preferred materials.
Moreover, you can’t simply rely on the homeowner’s insurance to cover the costs of roof replacement. On the contrary, this type of insurance is mainly effective in case of heavy snow, windstorm, lightning and other acts of nature. Meaning thereby, you need an appropriate roof warranty when it comes to replacing a damaged roof.
What type of Roof Materials are Covered with a Warranty?
In fact, getting a superior warranty for your roof isn’t the only thing that you must be concerned about, as most of the roof materials do offer a warranty. Nevertheless, you must look for a warranty that is effective for many years. Hence, just a five years warranty won’t be sufficient to ensure ideal protection for the roof.
The average lifespan of a roof is 20 years, and during this period, it has to withstand the worst weather conditions. Therefore, you should look for a roof warranty that should last at least 30 to 40 years. Besides, the years of coverage, knowing what aspects are covered by a warranty is equally important. To know what type of coverage a perfect roof warranty may provide, just take a look at some of these options.
When it comes to buying shingles, you may come across different types of warranties. For instance, most of the 3-Tab shingles come with a 25-year warranty; whereas, you are usually offered with a 50-year warranty when buying dimensional shingles. By having a long coverage, you can ensure best protection for your roof.
Coverage against Material Defects
Your roof should be strong enough to endure the harsh outdoor elements. In case your roof starts to show wear and tear after few years of installation, this could minimize the comfort level and energy efficiency of your home. Therefore, a great manufacturer warranty is what you need to cope with these issues and effectively cover the material defects.
Insurance against Poor Workmanship
As a matter of fact, your roof requires minor repairs once in a while. This may involve replacing the damaged shingles or repairing the popped up flashing. However, these are simple to handle repairs, which cause less trouble. On the contrary, if your roof needs some major repairs, chances are there that things may go wrong. This may happen when less skilled professionals did the installation job. If this is the case, concerns regarding the structural integrity of the roof are always there. This is the area where appropriate warranties kick in and provide required protection against the poor workmanship.
Warranty by Roofing Company is Insufficient
Although roofing contractors offer warranties against poor workmanship, just settling for this type of warranty isn’t a wise decision. Such warranty is directly linked with the existence of a company offering it. This suggests that you can’t claim such a warranty if the company goes down. So make sure to get a roofing warranty that also covers all types of installation issues.
Engage a Renowned Roofing Contractor
If roof replacement is what you are thinking of, don’t fall a prey to cheap and less experienced roofing contractors. Rather, you should focus on engaging a well-renowned roofing contractor.
Deciding as to what type of material is best for your roof is one of the most difficult decisions that you need to take when installing a new roof. This involves paying attention to various aspects like quality, longevity, and price of a particular material.
Usually, what you see around your neighborhood is that most of the roofs have asphalt shingles. But this doesn’t suggest that it is an appropriate choice for your home’s roof. To give you an idea, we have drawn a comparison between the tiles and asphalt shingles by considering their performance, durability, and cost factor. So, prior to buying a new roof, make sure to keep these essential aspects in mind.
What Climate do you live in?
If you live in an area, which experiences harsh weather conditions through most of the time of a year, you need strong protection for the roof. For instance, if there are freezing temperatures or high winds, you must consider the durability factor when installing a new roof.
Although asphalt shingles cost you less, they fail to endure the lashes of Mother Nature. They usually wrap up or break down after being exposed to strong winds or heat for a few years. Tiles, on the other hand, can withstand winds up to 180 mph, pass Grade-1 freeze-thaw requirements, and absorb minimum heat.
In most of the cases, roof replacement may turn out to be an expensive cut on your budget. So if you are tight on budget, it would be wise to go for asphalt shingles when you need to replace your home’s roof.
Asphalt shingles are less effective when it comes to durability. Even if you find them affordable upfront, they might cost you a lot in terms of replacing the roof after 10 years or so. Since concrete tiles are known for their resistance against severe heat or cold, they are usually recommended for all weather conditions.
Which one is more Energy Efficient?
If you are sick and tired of bearing cooling and heating costs, it’s time to make your home more energy efficient than ever. How?—it’s simple. By just insulating your roof with energy efficient roofing materials, you can lower the air conditioning costs.
During winters, your home loses most of its heat through its roof. This suggests that you need to heat your home continuously to maintain a comfortable room temperature. Similar is the case in the summer, where a considerable rise in temperature in the attic makes it difficult to cool your home.
So, what material you should use when installing a new roof? Asphalt shingles absorb most of the heat; hence, they aren’t something that you should consider when living in a hot climate. On the contrary, tiles reflect sunshine and heat, making them an ideal option for maintaining a comfortable temperature indoors.
If your budget doesn’t allow you to choose concrete roof tiles, you better consult a professional roofer to know whether you can get heat resistant asphalt shingles. By doing so, you can find a few options that may fit into your budget.
Think about Contacting a Reliable Roofer
When you are all set to install a new roof, the next step is to contact a roofing contractor. For this purpose, you should hire the best in the business, capable of meeting all your roofing needs within a set budget.
Roof is one of the most essential parts of your home when it comes to structural integrity, safety and comfort. You can enjoy all the luxuries of your home when it has a secure and strong roof. It offers required protections against the harshness of outdoor weather and gives a nice curb appeal to your home.
Therefore, you should be concerned about the structural integrity of your roof by monitoring any signs of wear and tear. But, what we usually hear about the maintenance of a roof isn’t true at all. Technically speaking, these are just myths. To give you a clear picture, we have tried to debunk some of the most common myths about roof.
Cover Over the Roof Problems
A few building codes do suggest that concealing the roof problems is an acceptable approach. This might appear to be fine in a legal perspective, but when it comes to technicalities and integrity of a roof, it wouldn’t be a wise decision.
For instance, if you don’t remove the old shingles or other roofing structures, it is simply impossible to inspect the cause of damage. This means that the undiscovered damage would cause destruction in the long run, even if you have replaced the outer layer of a roof.
All Shingles are Similar
Since shingles are manufactured while keeping in view their quality, cost, durability, and similar attributes, it is not possible that all of them exhibit similar properties. Hence, each type of single is made to perform well in specific conditions like humid, windy and hot weather conditions.
Some of them come with limited warranties and others offer lifetime warranties. Similarly, a few shingles are specifically manufactured to deal with issues such as excessive moisture, algae, heavy snow, and scorching heat. That being said, all shingles are not the same and you should contact a professional roofer to know what type of shingles is best for your roof.
Flashing is Shatterproof
Flashing is a metal structure, which is designed to offer required protection to chimneys, vents, piping, and other types of openings in a roof. Even though it is made from a strong material, considering it as indestructible isn’t wise. This part of a roof is also vulnerable to the damages caused by strong winds, hails, erosion and routine wear and tear. If exposed to excessive stress, it may suffer structural damage, lowering its overall performance.
You only Need to Inspect a Roof when it is Damaged
This is another myth, which is misleading homeowners since long. In fact, you should monitor or inspect your roof at the end of every four to six months depending on the weather conditions. Especially after heavy snowfall or rainy season, it is advised to carry out an ‘eyeball inspection’.
In addition, make sure to get your roof inspected by a professional Albany roofer annually. This is essential, as you can’t even imagine what type of damage harsh weather conditions may cause to your roof. Even a minor crack or missing shingle may prove disastrous for the integrity of your roof.
There is literally no way to know the condition of your roof by just standing in front of your home. This is because unlike other parts of your home, the roof isn’t viewable until you go up there and look for any signs of damage.
Moreover, replacing a roof is one of the most expensive and time-consuming repairs that your home may need. Hence, it is more important to maintain your roof in a good shape by identifying the minor issues and fixing them timely.
By doing so, you actually extend the life and performing abilities of a roof. In order to maintain your roof the right way, just consider these handy tips arranged for you.
There is no need to be there on the roof every day, as what it requires is just some routine inspections after a couple of months. On the contrary, you shouldn’t be lazy enough to wait for something to happen. The roof is an integral part of a home, as it protects you and the interior from severe outdoor conditions.
To get a better idea of the roof’s condition, you need to walk over it and find minor cracks or missing shingles or tiles. The best possible time to run an inspection is before the winter season and after it. Winter season means loads of snow piling up on the roof and afterward plenty of moisture to seep into the interior. To avoid happening this to your roof, it would be better to call a roofing contractor for a more detailed and authentic inspection.
Remove Debris out of the Gutters
Cleaning the gutters is a simple task in the sense that you don’t need to climb over the roof. Just grab a ladder and easily reach the gutter. You can remove the debris with a small scraper and after that wash it thoroughly with a garden hose. The most appropriate time to clean the gutters is at the end of fall, as this is the time when your gutters are filled with leaves.
Don’t Forget to Trim the Trees
Although trees enhance the curb appeal for your home and serve the purpose of a natural landscape, they also prove to be detrimental for the roof. This doesn’t mean that you need to cut all the trees around your home; rather, you should consider trimming the overhanging branches. It is essential, as in case of a windstorm, these branches can break apart and damage the roof or gutters by falling over them.
Clean it Properly
By cleaning a roof regularly, you can keep it in a good shape for years to come. When you remove the leaves and debris from a roof, you can prolong its life without any major repairs. When you climb over the roof for cleaning, you can also inspect it for minor damages. For instance, you can look for any signs of rust or aging on the flashing. Moreover, you can look for any missing shingles, tiles or damaged parts of gutters. This would save you a lot of money by minimizing the repair costs.
Need help with your roof and looking for a professional roofing company in Albany? Contact Ultimate Roofing today!
You’ve probably heard the word roof flashing thrown around sometimes when you were discussing repairs with your roofing contractor. If you never really knew what it meant, it’s okay. You’re not the only one. Most homeowners will not be familiar with the roofing lingo and flashing is a word that might confuse them. In the roofing business, flashing is done in the intersecting points where the roofing material abuts the walls to keep them watertight. So, flashing is done around skylights and chimneys as well as another other crevice or valley that you might have on your roof.
Flashing is a way to seal the roof completely and cut it off from the interior of your house. The importance of this is a no brainer. You don’t want water leaking in through these transitional joints and you want an even roof above your head. There are certain technicalities that come with roof flashing including the fact that the materials used in it can expand with the rise in temperature. This is why proper installation of this sealant is essential to keep your roof free from water damages.
Why is roof flashing done?
We’ve already mentioned how flashing keeps water from leaking into your home but flashing also plays a role in ventilation and keeping your roof airtight at all tights. Improper flashing will result in wet spots forming on your ceiling or water trickling down your chimney or from the edges of your skylight. If you notice any of these red flags, get in touch with a licensed roofer immediately. Chances are that you’ll need your flashing redone.
What materials are used in flashing?
Today, there are various options in the market to choose from for your flashing. An experienced roofer should be able to guide you properly on the kind of material you should invest in. Roof flashing can be done using copper, stainless steel, aluminum, lead and even plastic. It’s up to your budget and the quality of flashing you require which type of material you should choose for roof flashing.
Generally copper is a more preferred material because it is malleable and does not corrode easily. It’s also tensile and strong in quality so it a bad storm shouldn’t be able to damage it. Metal flashing is on the high end of the flashing spectrum though so if you don’t have the budget for it consider plastic flashing instead.
How is the flashing installed?
Roof flashing installation requires skills and professional tools, both of which a licensed roofer should have. Since flashing plays an integral part in keeping your roof water tight, don’t choose DIY option. You roofer will install the flashing before fitting in the tiles of the roof. But if only a repair job is required then your contractor will remove a few lines of tiles to make space for the flashing material.
Flashing is susceptible to damage from faulty installation, bad weather conditions and advancing age. If you notice any signs for flashing damage, get in touch with Ultimate Roofing, your premier roofing company in Albany immediately!
One of the chief complaints as roofers in Albany is having is a leaky roof. Water damage can sneak in when you least expect it. Sometimes it’s caused by a harsh storm that has just hit your town; other times it’s just the age factor that’s taking a toll on your roof. Whatever the reason for the damage is, it’s important that you find it soon and get it repaired ASAP. Water damage does not always leave an obvious trace; sometimes you’ll have to inspect your roof thoroughly for any signs of a leak.
In this blog post, we’ll look into some of the most primary signs of a leaky or water-damaged roof. If you’re still unable to perform a thorough check, consider hiring an expert roofer for the job.
Timing is important when you’re checking for water damage on your roof. Ideally you should be evaluating the roof right after the bad weather has passed. Don’t attempt to investigate during the downpour because that could prove fatal.
Look for signs of water damage from the outside
Most leaks will show themselves outside first before you find signs of them on your ceilings. Get your safety gear on and use a ladder to climb the roof. Inspect thoroughly for any signs of water damage. You should be paying close attention to the clogged and leaky gutter lining and peeling paint, both of which are important signs of water damage to your roof. If you notice any greens and fungi growing on your rooftop, the water damage has probably already progressed. If that’s the case then you’ll need to hire a licensed roofer for the job immediately.
Look for signs of water damage from the inside
Some homeowners will first notice the signs of water damage from the inside of their house. If you notice damp spots that drip on your ceiling, you probably have a leaky roof that you need to deal with. If you have an attic in your house, this is the room where the signs will first appear. You might also notice a damp, swampy smell in the air, moss growing inside and peeling paint.
You can investigate a leaky ceiling even during the rain so it’s a good idea to check for wet spots on your attic when the rain is in full swing.
Water damage is a common problem that every homeowner has to deal with at some point in time. Talk to an expert to discuss repair options and, if required, the possibility of a roof replacement.
Contact Southern Star Roofing for all your roofing needs. We are the premier roofing company in Albany available to assist and exceed your expectations!
Hiring a professional and reliable Albany roofer can be daunting. After all, your roof needs proper care and attention from someone who knows what they’re doing. Not only is it important that your roofer uses high quality roofing material but it’s equally important that they know how to correctly install it. It doesn’t matter how small your roofing problem is, the contractor you hire for the job should be well-versed in the art of roofing. Whether you have a leak on your hand or some broken shingles, invest your time and research into a roofer you can rely on.
Before you sign the deal with anyone, consider asking the questions outlined in this article.
Does the company have a physical address?
There seems to be a growing trend of roofers working remotely and out of trucks. They suddenly appear after a bad weather when you’re desperately in search of a roofer. They might coax you with appealing repair costs as well but don’t fall into this common trap. Before you sign any document, ask for the entire data of the contractor. A company that has a physical address or an office is likely to be professional and licensed. It’s also important that you’re able to reach out to the roofer in case an after-repair issue arises. That’s why you should inquire about the full name and address of the company before you hire them.
Is the company licensed and insured?
It is absolutely essential that the contractor you work with is licensed. A roofers license is proof that they have the skills and the expertise to do a roofing job. Equally important is to know that the roofer you intend to hire is insured. This will protect you financially from any injuries or accidents that could occur to the roofing team on the job site.
Does the company hire subcontractors?
This is another important question you should ask your roofer before beginning the job. Some companies will hire subcontractors to handle part of the job. You’d want to know who you’ll be working with and, as in the case of the roofer, you will need to know if they are adequately insured and licensed.
Does the company offer any warranty?
Warranties are definitely an important element in a roofing job. Typically the warranty should extend to at least a year, ideally two. Roofing warranty is important because you want to make sure that the roofer can check in with you if some repair problem occludes. If the problem arises in the material, the manufacturer’s warranty will apply but if the problem is due to faulty installation, your roofer will be accountable. The document that you’ll be asked to sign before hiring the contractor should mention their warranty policy so make sure you go through it in detail. If the document fails to mention that, talk directly to your roofer and ask them about their warranty policy,
Can the company provide references?
Everyone knows that feedback is an important part of hiring any company. Don’t be convinced by reviews online only because you never know how authentic they are. Instead, ask directly for any homeowner references the roofer can provide you with. If they can’t, it’s best to look for another contractor. If they can, get in touch with the customers and learn about their experience with the roofing company you’re about to hire.
These are just some of the questions that you should ask a roofing contractor before signing the deal. You should also ask them whether they give a written estimate for the job, their years of experience in the business and other relevant questions that might clue you in about the professionalism of the roofer.
Roofing is a business that, like all every other business in the world, has its own special lingo. Roofing terms can be perplexing to a bystander and if you’ve never gotten a roofing job done before, you probably haven’t even heard the most basic terms. There’s no need to be embarrassed though. We’ve seen many homeowners in our course of work that have no idea what we’re talking about. If you really want to give your roof the proper attention it deserves, we suggest you learn the secret language. Before you hop on into a contract with your roofer, school yourself with some basic terms used in the roofing business. Here in this article we’re outlining some common terms used frequently by roofers around the country.
Keep reading to familiarize yourself with what you’re getting into. Learning these terms will help you and your roofer be on the same page and it will make voicing your concerns and decisions much easier.
This term is probably not that complicated. Asphalt is a popular material that is used to make shingles in many parts of the world. In fact, it’s the most commonly used roofing material in the US alone. Homeowners choose asphalt shingles because they come at a relatively lower price, have a long lifespan, and are easy to fit and install.
Flashing in a roof is using special materials at the transitional points and valleys of your roof to keep them watertight a well as airtight. Roof flashing makes an integral part of any installation process without which your roof will constantly be exposed to leaks. Flashing is typically done around chimneys, sky lights and other intersections on your roof.
Similar to the gutters in your bathroom or your lawn, roof gutters have the purpose of draining water and keeping it from pooling on the top. It makes a water channel through which rain water can pour down. Gutters commonly get clogged if you don’t maintain your roof and this can cause water damage to your roof.
Granules are tiny particles on the surface of the asphalt shingles. They are typically made up of ceramic coated crushed rock. Granules enhance the appearance of the shingles, improve fire resistance of your roof and protect it from the sun. These granules can also be chipped off if your shingles are damaged and they can clog the gutter resulting in water damage.
This is the part of your roof that projects out over the wall edges of your house.
In roofing, truss is a specific piece of material that adds extra support to the rafters.
Ridge is an angle formed at the point where two roof planes (sloping) intersect. This is an external angle.
Valleys in your roof are the dips formed when two downward sloping sections intersect. They typically create a V-shaped area and require flashing to keep them watertight.
Fascia is a layer of boards that is fitted on top of the rafters for an extra boost of protection. Fascia can also be fitted on the walls.
Underneath the layer of shingles is the underlayment which also serves to provide extra protection and strength to your roof.
Vents on the roof are similar to the vents installed inside your home. The purpose of a vent is to ventilate and provide fresh air to your home. This is usually done through the roof deck but any additional outlet of air can also serve as a vent.
The dormer is what is installed on the upper edges of your windows that is part of the projecting slant of the roof. It adds extra protection.
Metal sounds luxurious. Asphalt sounds easy. When it comes to your roof which adjective appeals to you? The truth of the matter is that both asphalt and metal roofing have their share of pros and cons. But there’s one fact none of us can deny – they’re both the frontrunners in the roofing market. Asphalt roofing has been around for years and it’s the most popular roofing material seen in homes across the US. Metal roofing, on the other hand, is slowly rising to fame for all the good reasons.
If you’re planning to install a new roof, you should be open to all the options available in the market. It’s okay if you’re not the best decision maker; we’ve written this article just for you so that you could make an informed decision of the roofing material you’d like to have installed.
The Highs and Lows of Metal Roofing
Metal roofs were often associated with large warehouses but now you’ll see them installed in homes as well. What’s the big deal about this kind of roofing material, you ask? Let’s break it down.
#1: It’s Long-Lasting!
Metal Roofs come with one obvious advantage: they are seriously long-lasting. On average, your metal roof has a lifespan of about eighty years. Compared to the two decade age limit mark of asphalt roofing, metal roofing definitely holds out much longer. This means that in the long run, metal roofing might actually be cost-effective.
#2: Metal is Durable, We All Know That!
The best property of a metal roof is that it is highly durable and strong. That means that this type of roofing can protect your home adequately against the four elements.
#3: They Don’t Need a Lot of Maintenance
Because metal is highly durable and resistant against the four elements, it is also easier to maintain. You won’t need to run up to your roof every time a storm hits and you won’t find missing shingles scattered about. You will need annual inspections of your roof of course but regular maintenance won’t really be required.
#4: They Come in All Kinds of Materials
We all love to have our options open; with metal roofing, there are plenty of material options in the market including copper, zinc, aluminum and more. Decide what suits your roof aesthetics best from the variety of options available.
#5: They Keep Your Utility Bills in Check!
Metal roofs are exceptional when it comes to energy saving. These roofs reflect UV rays and absorb little heat. This means that your house will be naturally cool and you won’t need air conditioners. Metal roofing is, thus, pretty energy-efficient.
#5: Metal is Green!
Although this seems like an oxymoron, metal roofs can actually be pretty clean. That’s because metal can be recycled. In fact, metal can be recycled to an almost 100%.
Although metal roofs supply us with so many great features, homeowners are usually put off by the initial cost of the project. However, you should remember that metal roofing can be cost-effective in the long run because they last longer and they need little maintenance.
The Highs and Lows of Asphalt Roofing
Asphalt is the traditional roofing material that is popular because of its low cost, variety of design options and an easy installation. When compared to metal roofs, they aren’t as environmentally friendly and they require a lot more maintenance. Plus, they last half the life of an average metal roof.
The price of asphalt shingle roofing is what appeals to most homeowners but when you’re thinking of a roof installation, think about all the pros and cons of the two materials before making the final decision.
Contact your professional Albany roofers for all your roofing needs!
The gutters of your home have a pretty extended life span but they still do come with an age limit on them. Just like everything else on your roof, these gutters are vulnerable to environmental insult. This means that there will come a time when you’ll have to think about an entire guttering replacement. A dysfunctional drainage system could spell trouble for the rest of the roof. Without a proper exit channel for rainwater, your roof could suffer from water damage and leaks overtime. Gutters play an important role in directing water away from your home so that they don’t get damaged.
But how do you know when it’s time to replace the gutters? Why not simply get the drains unclogged instead? We’ve got the answer for you in this article. Keep reading to know how to tell when you need a roof gutter replacement.
The Cracking Warning Sign
Cracks in the gutters are an extremely common phenomenon but one that are often left unattended. Although cracking, chipping or splitting may not look like a big deal but it can accumulate into a big problem in the long run. These cracks can coalesce to form large cracks which will further the damage to the gutters. Overtime, this will inevitably affect the quality of the fascia board and the shingles of your roof. If there are only a few cracks, you could still save the guttering system from irreparable damage. Sometimes simple flashing can help. But if the cracks are larger and more in number, you should consider replacing the entire gutter.
Gutters Breaking Away From the Roof
This is another common sign that is precipitated with age and a bad storm. The drain pipes sometimes break free from their fasteners and away from their point of attachment to the roof. This changes the slope of the draining water and could cause clogging. If there is a visible space between the pipes and the roof, your fascia board might be in danger. You might be tempted to fix this problem with a simple nail and hammer job but if the fascia is eroding, there’s no other solution other than a gutter replacement.
Water damage has some cardinal signs that anyone can pick up. Swollen and peeling paint is a sign everyone knows about. If the paint on the gutters starts peeling, this should prompt you into considering a replacement. You could also prevent more damage to the gutter if you act quickly. Regular maintenance and unclogging the drains can help prevent the vicious cycle of damage.
Greens Growing Around the Pipes
Another classic sign of leaks and water damage is moss or mildew growth. If you notice greens growing around the gutter pipes or on the roof, it could be because of a fault drainage system. Sometimes simple cleaning will do the trick but if there is obvious fungus growth, the problem is much thicker than that. You will probably require a complete replacement of the gutters to correct it.
Wrong Pitch of the Gutters
The pitch of your gutters is important in maintaining the proper flow of water. Without a correct pitch, water will pool on the roof and damage it. If your gutter isn’t properly pitched, you should consider a gutter replacement.
If you notice water damage directly under the gutters, it’s a sign of damage that’s beyond your control. It’s important that you inspect your roof and the drainage system regularly to keep a close eye on how they hold up. Always perform an inspection when the sky is clear so watermarks and other signs of water damage are easy to see.
There’s a lot to love in a shingle roof but perhaps one of the biggest perks are the diverse options available in design and hues. When you’re getting your new roof installed, you want it to look fabulous. You also want it to be perfect for the environment you live in. Picking the right color can be daunting but it doesn’t have to be. Here in this blog post we’re listing down all the ways to make the best decision for your roof.
Since you won’t need the shingles replaced in 20 years or so, you should always consider options that will hold up in both quality and fashion for the years to come. Luckily, there are plenty of options in the market so we’re sure you’ll find the right color for your roof!
Consider your location
That sexy matte black color might be attractive but when you live in a city where the temperature all around the year is a boiling 40 degrees, maybe black isn’t the best decision. Always think about the climate of your town when you’re choosing the color. Cooler colors like whites keep the temperature of your home down and help controlling the utility bills. Consider these cooler options if you live in a hot climate.
On the other hand, dark colors absorb more heat from the sun and raise the temperature of your home. These will help keep your home warm in areas that have a cold climate. Plus, these dark hued shingles accelerate melting of snow from your rooftop.
Think about your home’s aesthetic
Don’t be drawn to that exuberant neon shingle just yet. You want to pick a color for your shingles that properly complements the rest of your home’s structure and style. When you’re making a decision, think about the colors of the bricks and the siding of your house. Does your potential color make a good pair with it?
You should also consider the illusion of size that different colored shingles give. Darker colors make the roof look smaller while cooler colors have the opposite effect. Make a fashionable decision and make sure whatever you choose matches well with the rest of your house.
Don’t forget the neighbors!
Along with considering the aesthetics of your own home, also take a good look at the houses around you. It’s always a good idea to stand out but if you want a more symmetrical look, you could opt for similar shingle shades as your neighbors’. Whatever you decide, it should complement the roof right next to you. If you live in complexes that are run through an association, make sure that there aren’t any rules for all the houses to have the same shingle colors and the same style.
Pair with the Shutters
When the shutters are a different color than the siding of your roof, you could choose the same color of the shutters for your roof for a complemented, aesthetic look. You can also change the shutter color to match with the shingle color of your choice. Pairing these two structures will give a more even and fashionable look to your entire house.
Looking for a quality, professional and affordable Albany roofer? Contact the roofing pros at Ultimate Roofing today!
Have you heard your neighbor rave about how he saved big by layering his new roof over the old one? Did that one article online tell you there’s no need for a roof inspection if you don’t live in a rainy climate? Homeowners often find themselves flooded with a variety of roof misconceptions that can negatively affect how they plan to proceed with their roofing project. Not everything Google tells you or what you watch in YouTube videos is legit; in fact, it hardly ever is. Knowing the facts from the myths is something every homeowner considering a big roofing project in the near future should know. The only way to really get your facts straight is through a qualified and knowledgeable roofing contractor.
Ultimate Roofing is a reputable roofing company with professional roofers on its team. This article will clearly outline all of the roofing misconceptions you’ve had and what the truth really is so keep reading!
Common Roofing Misconceptions
Myth #1: There’s no need to remove the old roof; just install the new one on top
One of the biggest misconceptions when it comes to a new roof installation is layering a new bed of shingles over the last one. This is a shortcut and might save you some cash initially but it can seriously undermine the quality of your roof in the long run. The cost of future roof repairs will escalate in no time and you might find yourself in deep waters with a new roofing installation pretty soon.
Myth #2: Inspections are a waste of time
No one will tell you not to get your roof inspected after a bad storm has passed, but almost everyone will tell you not to get one done when there hasn’t been a drop of rain in months. Regular or annual roof inspections are actually pretty crucial to always keep tabs on the status of your roof even when the weather conditions have been decent. You might not require a roof inspection in the same year as your roof installation but you will need one done at least once or twice a year in the subsequent years. Roof inspections are important to rule out any underlying roofing issue and call for repairs immediately before the problems gets out of hand.
Myth #3: Metal roofs are unnecessarily expensive
Many homeowners find metal roofs ugly and that really boils down to your personal preference but people who think these roofs aren’t worth the money they put in are completely mistaken. Metal roofs naturally require more labor and the cost of its installation is at the high end of the spectrum but that also means that these roofs last much longer, need fewer repairs and are a lot more energy efficient than conventional shingle roofing.
Myth #4: Ventilation and Insulation don’t make a difference
We can’t stress enough how important proper ventilation and insulation are to your roof. If anyone tells you otherwise, don’t believe them! Without a proper ventilation system, you’re inevitably inviting moisture into your house and that consequently will lead to mold and moss growth. A poorly insulated roof, on the other hand, is directly proportional to your utility bills.
Myth #5: My roof warranty is complete and covers everything
It’s always a good idea to check out the warranty policy that comes with your roof and this includes both the manufacturer warranty and the roofer warranty. You’ll have to make sure both of these warranties are in sync before you can claim that your roof is entirely covered by warranty.
Need help with a roofing project? Call the Albany roofing pros today at (518) 888-7663
Considering a roofing project and thinking about hiring a roofing company in Albany? You might want to brush up on your roofing terminology so you can keep up with the conversation!
The roofing lingo can go straight over anyone’s head unless they’ve actually taken time to educate themselves on this topic. As with every other profession that exists, roofing terminology is unique and must be learned to understand how the business works. Whether you’re a homeowner in search of a contractor for a roof repair project or just someone who is interested in the art of roofing, you’ve come to the right place. In this article, we will teach you some of the most basic roofing terminology that you might meet during your roofing ventures.
TOP ROOFING TERMINOLOGY
AGGREGATE: The aggregate on your roof is foundation of protection. It acts as the primary base for your roof and protects your house from harmful UV rays and provides insulation. An aggregate can be constructed with a variety of different materials but the purpose of it remains the same.
APRON FLASHING: Flashing is done on joints to prevent water from seeping through the roof structures. Apron flashing refers to the flashing that is present under a roof curvature in particular.
ASPHALT CEMENT: Also known as plastic or flashing cement, this type of cement is a blend of bitumen, fibers and mineral stabilizers.
BALLAST: Ballast is an umbrella term that is sometimes used for materials that cover the top or the membrane of your roof.
BASE FLASHING: Roofing membrane is constructed with base flashing material. It serves to prevent water from leaking into the several roof intersections.
BITUMEN: Bitumen is more commonly associated with road project to seal and suture road asphalt. In roofs built with asphalt materials, this petroleum distillate is also used.
BLIND NAILING: Since nails can suffer from easy corrosion, blind nailing is a technique to place nails where they are the least exposed to the environmental elements. It’s an excellent technique to improve the longevity of the nails and hence your roof.
BUILT-UP ROOF: In the US, sloped roofs are much more common than the flatter ones. A roof with a low or flat slope is referred to as a built-up roof made with multiple layers of asphalt and gravel.
CAP FLASHING: On top of the base flashing comes the cap flashing for an even more leak-proof quality of your roof.
CAP SHEET: On top of a built-up roof comes the cap sheet constructed with granules.
CHANNEL FLASHING: Channel flashing is one the more useful types of flashing with a built-in run-off channel for water. It is located in planes of intersection.
COMPOSITION SHINGLE: For steep-sloped roof, composite shingles are usually advised. These shingles are made with a mixture of asphalt and other roofing materials.
COUNTER FLASHING: This highly common type of flashing is placed on the very top of the house wall above the shingles and its flashing.
DAMP PROOFING: Sometimes roofers will pretreat your roofs to see how well your roof can resist water seepage. This is known as damp proofing.
DIMENSIONAL SHINGLE: Shingles that are textured in such a way so as to produce a 3D effect are called dimensional or laminated shingles. The latter is a misnomer because these shingles need not always be laminated shingles.
DORMER: Dormers are framed roof projections. An easy example of a dormer is your window.
Familiarizing yourself with roofing terminology can help you greatly when you’re undertaking a new roofing project. You should also feel free to talk to your roofing company about the process of roofing and how he plans to proceed!
Need help with a roofing project and looking for an Albany roofer? Contact Ultimate Roofing today!
The roof on your house, the defender against all environmental elements, is a constant prey to weather damage. When an aggressive storm hits town, your roof will likely to get much more insult compared to the windows, doors or even the walls of your house. The large surface area of it and its position on top make it a susceptible target. Not only does your roof take a beating in adverse weather conditions, it’s not a rare event for it to suffer from some sort of damage when the sun’s out. Since your roof acts as a shade for your entire house, it is exposed to the most amount of UV rays from the sun and we all know how harmful UV light can be! To put it simply, your roof is constantly undergoing some sort of degeneration, whether it’s chronic or acute. And that’s exactly why your roof needs repairs and regular maintenance.
Not every homeowner is familiar with the signs of roof damage and the key signs to look out for that beg for a repair. Building a house is itself a big expense and to make sure you’ve invested your money right, you want to keep your roof maintained and functioning for a long time. Aging can further deteriorate the quality and function of your roof and the effects of aging are multiplied if you don’t get the necessary repairs every now and then.
Here in this blog post, we’ll throw light upon some of the most important roof damage that should instantly alert you that you require a repair.
Top 3 Roofing Problems to Address
#1: Leaky Roofs and Water Damage
Sometimes something so harmless like water can be the worst enemy for your roof. Water damages are one of the most common and the most fatal roof problems that should prompt you into calling a professional contractor for the necessary repairs. This type of damage can show signs both inside the house and outside it.
From the outside, leaks and water damage can manifest in the form of clogged gutters and damaged or eroded fascia. The recommended course of action to investigate signs of water damage outside your home is to take a quick look at the gutters and soffits. You should also keep a careful lookout for the fascia underneath the soffit. The fascia is often found damaged or soaked when there is a leak or water damage. You might also find the paint peeling, growth of greens on it or even the boards swollen up. Gutters are frequently found clogged when water damage occurs and if that’s the case, then your drainage system might be causing the water damage in the first place.
You will also be able to see the signs of water damage from inside your house if the water damage is especially large. The ceilings, especially of your attic, are the first victims of water damage and leaks. If you notice large wet spots, peeling paint or swelling of the paint in your ceiling or even your wall, it’s a sure shot sign that there’s a leak on your roof. Sometimes the leak might even start dripping. This is when the leak has extended beyond control and you’ll need to contact a professional roofer immediately.
Apart from the ceiling, signs of water damage can also be investigated from the chimney of your house. Usually the flashing around the chimney keeps water from seeping in but when the flashing is damaged or chipped off, you will notice the chimney walls get damp from rainwater. It’s a good idea to check the bricks of your chimney for any dampness when it rains.
The attic, as already stated before, is the first place in your house that will show the typical signs of water damage. Before you pass the verdict on a leaky roof, you should go to your attic and take a look around for any signs of water damage. If a leak or water damage has occurred, you’re likely to find leaks in the ceiling and even damp floors or rafters. The ridge line in your attic might also be affected with water damage. The ventilation pipes in your home could also present with signs of water damage so it’s wise to evaluate vents and pipes that originate from your roof.
Water damage also inevitably comes with a certain damp smell in the air that can easily be picked up. Other signs of roof water damage can be swollen wood and mold growth especially when the damage has progressed to a fair amount.
#2: Check for any signs of mold growth
Mold is one of the dreadful signs of roof water damage that nobody wants to experience. Mold remediation is an extremely stressful and expensive project so you want to make sure that the problem is nipped in the bud before it propels out of hand.
Water damage leads to mold growth but sometimes there might be no other signs of water damage or leaks and you could still experience the growth of mold. In those unexpected cases, it would be a good idea to investigate your ventilation system. Improper roofing ventilation could build up the moisture content inside your home and we all know that mold thrive in humid, moist conditions. The attic or the basement is especially vulnerable to mold growth because these rooms tend to be the most humid naturally.
Mold can not only be unsightly but it also encourages respiratory tract problems and aggravates allergies, asthma and skin issues. If you want to make sure your family gets a healthy environment in your house, you need to stop mold growth in its tracks by contacting an expert roofer to fix the underlying water damage.
#3: Check for any signs of moss and algae on your roof
While mold grows preferentially inside your house, other fungal greens like moss and algae can be found outside on top of your roof when there’s water damage. Moss, algae, lichens and other classes of fungi are an alarming condition to have flourishing on your roof. It’s not too hard to find out exactly which type of green is growing on your roof but at the end of the day, they all cause the same type of roof damage.
For starters, moss and algae make your roof look dirty, unattractive and inhospitable. They deteriorate the appeal of your house and they also cause functional damage to your roof. Excess moss and algae on a roof inevitably leads to a complete roof replacement and that is an expensive project. If you want to make sure your roof stays in shape and moss free for a long time, you should call for the necessary repairs as soon as you can and stop its growth in its tracks. What homeowners need to realize is that since moss and algae are fungus, they’re not exactly dead or metabolically inactive. In fact, these organisms are constantly leaching nutrients and participating in the active degeneration of various roof structures. Shingles are probably the first targets and when moss and algae grows on your roof, you might find your shingles become loose, break or go entirely missing from their roots. This is because the fungus can actually make use of the oils that constitute asphalt shingles and use it as a source to produce their fuels; the result of which is disintegrated shingles with granules and debris found in drain pipes.
Since shingles make up the most important part of your roof, any damage to them will ultimately result in your entire roof becoming compromised. Constant shingle damage will lead to your roof losing its form and function. Excess moss and algae might even cause the roof to buckle under pressure. Plus if a storm hits a roof that’s in such a bad shape, it could essentially lead to a roofing crisis.
Nowadays some homeowners have shifted to metal roofing instead of asphalt shingles. Along with increased longevity that comes with metal roofs, roofs made up of zinc or copper is toxic to biological growth and may be your best choice if you want an algae-resistant roof. However, metal roofs are considerably more costly and require more complex installation that the average asphalt shingle roof.
Contact a Qualified Roofing Company Today!
At Ultimate Roofing, your roof is always our priority. Whether you need repairs from water damage, leaks, clogged drains, mold or moss growing on top of your roof, our expert roofers are equipped to handle it in an effective and professional manner.
Contact us today!
A new roof installation can be a daunting process not only because it’s a major investment but also because it can span over days to weeks with roofing labor present in your house most of the day and materials and old roof debris piling up in your property. But once the project has been completed, it all seems worth it – or does it?
Not every new roof installed comes out perfect and some might even show signs of failing almost immediately. You might find yourself in deep waters with roof damages and leaks as well as new repairs soon. Inadequate and unprofessional roof installation can often lead to these dire consequences. Here are some of the commonest reasons why your new roof is failing.
Roof installation isn’t just everyone’s cup of tea. If you left this project in the hands of an inexperienced roofer or if you tried to do it DIY, you could have just messed up the installation process big time. Even if you have top quality roofing material, improper installation is the number one culprit of a new roof failing. Always do your research when it comes to hiring roofing contractors; a company that is licensed and reputable with a good work history is ideal.
Poor Roofing Materials
Another prime cause of a roof failing is roofing materials that are below standard. A cheap price tag has an appeal for sure but it could also potentially compromise your entire roof and build up repairing costs for you in the future. On the other hand, the most costly materials don’t necessarily mean they’re the absolute best either. Talk to an expert before you invest in your roofing materials.
Caulking over Flashing
Flashing is an integral part of your roof that keeps water from seeping in through the joints. Unfortunately some homeowners and even roofers believe that flashing does nothing but improve the appearance of your roof. Instead they choose the easy way out: caulking.
Caulking your chimney, skylights and other structures is a roofing hazard. Overtime the caulk can break compromising the entire joint of the roof. If you chose caulking over flashing in your roof too, it could be the source of your new roof failing.
Call a qualified roofing company today to discuss all of your concerns with your new roof. An expert can tell you exactly how to proceed and how to make your roof last a long time.
In the universe of roofing, professional terms and technicalities can come off as extremely perplexing especially for the layman. A good majority of homeowners aren’t too familiar with how the roofing system works and how your roof and its several elements can get damaged. A lack of familiarity in this area particularly when you’re considering a new roofing project can be a serious drawback on your part. In this article, we discuss the single most frequently asked roofing question: how should you choose your roofer?
What Questions Should I ask when hiring a Roofing Company?
Before you jump into the technicalities of roofing, it’s important that you do your research and find a credible roofing contractor to work with. As in every other profession, you’d want to leave the roofing repairs and installation in good, reliable hands. There several ways to confirm the certification and work experience of a roofing contractor but the entire process can often come off as daunting for a lot of homeowners. Whatever you do, just remember that the cheapest option in the market is probably far from the best one. It’s natural to get pivoted towards low rates but inexplicably low rates are never a good sign. So if you were thinking about hiring a cheap roofer, you should probably scratch that off your list immediately if you genuinely want a roofing job well done.
There are other things to look for in a roofer in Albany before you make the final decision and sign the deal. Here are some key things to investigate during your hunt for the best contractor in town:
Rates: As already stated, when you’re researching on the best roofing contractor, it’s important not to get fazed by the price alone. Sometimes even the most expensive contractors don’t make it worth the money you’ve spent. Roofing rates are probably the least specific indicator of how good a roofing company is.
Type of Materials: It’s important to understand that not all roofing material is high quality. You should also have enough elementary knowledge to identify and differentiate the poor quality roofing materials from the better quality ones. If your roofer suggests working with the poorer quality, it’s red flag for sure.
Work Experience: Feedback, testimonies and accreditation are all essential in determining the roofer you want to hire in your next roofing project. Ideally you want to steer clear from contractors that have a poor track record or are new in the game. You should also validate the reviews by checking from multiple sources. Often the reviews listed on the company’s personal website or social media page are fake so you want to be wary of that.
Work Plan: A good roofer will have everything planned out before the start of the project so he can move systematically step after step and complete your project in a given time period. Roofers that appear vague in their planning and don’t provide a solid timeline are roofers that you don’t want to be working with.
Insurance: Last but not least, you need to be absolutely sure that the company you plan to hire is insured fully so any additional unforeseen costs can be covered. Make sure you ask your roofer for proof that the company is insured.
Take Your Time!
When hiring a professional roofer it is crucial that you don’t make rushed decisions. Familiarize yourself with the process and complete your research on the best possible roofing contractor you can find in your locality. Remember: your roof is the shield to your house and you want to give it the attention it deserves.
Ultimate Roofing is a renowned firm established to provide the utmost level of professional roofing services for our clients. Our extensive work history and track record is a brilliant testimony of our roofing business. If you live in the greater Albany region, contact us today!
Safety first – this saying applies to practically every action you take. This applies to the work the professional roofing company you hired undertakes. Replacing a roof or even conducting minor repairs on it is no joke. We’re talking about an entire structure of your house that shields the inside from all the elements around. The process is lengthy and complex even for an expert and it puts a risk on safety.
Ensuring that your roofing specialists knows how to engage in safe work and maintains a certain standard of safety is imperative. If that’s not done, it could be a major setback for you as well as the company you are working with.
What can be done about ensuring safety?
As a homeowner, your main job is to conduct adequate research and to prod on all the right questions. Take your sweet time in asking your prospective company about their workplace insurance, their liability insurance and their safety and insurance board certification. Go one step further and ask your roofing contractor if they have a documented or written form of their safety and health policy. A good company will likely to have a small booklet on this matter because, again, safety when it comes to roofing matters is not something to be taken lightly.
What happens if you don’t ensure your selected company plays it safe?
The obvious answer to this is that your roofer could get hurt. Many similar incidents in the past have occurred where an untrained individual fell from a great height because they did not have the right safety equipment or followed the safety protocol.
But how is this bad for the homeowner aka you? If your roofing contractor is not insured and lacks all the important documents aforementioned, it could get you in trouble. The company could sue you and you could be charged to pay the roofer’s medical pays – which, by the way, are not cheap.
Save yourself from this sticky situation by ensuring the company you plan to hire for your roofing job understands the importance of safety, follows the protocol, and has all the important documents to back their claim.
Got roofing questions? Call Ultimate Roofing today!
When you’re out on a hunt for roofing professionals that can fix your roof or install a new one, you naturally gravitate towards the more economical bids. Roofing jobs don’t come cheap so when a company offers you an unbelievably low bid on the job, you sign the deal with them. But is it the right way to go about?
A bid that is exceptionally low from the price quoted by other roofing contractor is likely to be a scam. You’ll start off content with your decision and believe you’ve save a lot of money on an expensive roofing job but you might soon realize that the final cost of the repair is much higher than the one proposed initially. It may even possibly be higher than the bids other companies gave you that you ignored as being too pricey compared to this low bid one.
This low bid scam is a very common one and many credulous homeowners fall prey to it. The scamming company will charge you a lot more during the process of repair. They may say that the price of the roofing materials has elevated or that they have discovered new problems with your roof that will require extra payment to fix.
In the end, you’ll find yourself paying more than the first bid. And if you refuse to pay, the roofer might leave your job midway which can be equally problematic.
How Can You Save Yourself From Getting Scammed?
Vigilance is the most important thing you need to protect yourself from this scam. If a company offers you an unbelievably low bid on your roofing job, it’s your task to do adequate research on the company at hand.
You should inquire from the company about how they plan to address unforeseen roof issues. You should also make sure that the cost of labor, materials and damaged decking are all included in the initial contract so you don’t have to make any ‘extra’ payments during the repairing process.
It’s also important to check out the credentials and testimonials for the company as well as to make sure the company is licensed and registered. One good tip to save yourself from fraud is to avoid giving a large sum of deposit before the work begins. Be sure to do your homework and find a reputable roofing contractor.
Contact Ultimate Roofing for all your roofing needs in the Capital Region today!
Before you pick up that phone and dial for the nearest or cheapest roofing contract in your locality, there are few prerequisites that must be followed to ensure that you’re getting the best service. Unfortunately when it comes to roofing work, homeowners panic and simply do not feel the need to follow these prerequisites which can ultimately lead to a bad job done for your roof. If you want to avoid these mistakes, give this post a read!
#1: Not Conducting Adequate Research
When you’re hiring an expert to do a job for you, you naturally want the best. But in order to do so, you’ll need some proof that the professional is actually good at what they say they are. With roofing work, the same rule applies. A lot of homeowners will skip the research part completely which can totally backfire.
You’ll need to research in depth on the company you plan to hire. This includes reading previous client reviews and testimonies, ensuring the company has a physical location or an office where you can reach out to them, and to check their rating on the official business board.
#2: Working with a Company Without Insurance or a License
As with most important jobs, insurance is a must. Make sure the roofing company in Albany is insured and licensed to actually work in New York State. This is important because in unforeseen circumstances, you won’t be held accountable for the accidents that happen to the roof or the company you are working with.
#3: No Getting an Estimate in Writing
One crucial point to remember before hiring a roofing specialist is to get an estimate of the roofing work that will need to be done. This does not mean an oral declaration of the estimate. This means that you need to get the estimate in writing and signed by the company so in the case of any discrepancy later on, you’ll have the written documents to back you up.
#4: Going for the Cheapest Company
This is one of the most common mistakes homeowners make when hiring roofing contractors. Naturally, homeowners are attracted to companies that give a low bid estimate but remember – if the bid is too good to be true, it’s probably a scam. In that case, you’ll need to do some background check on the company.
Similarly, some people believe that an expensive roofer will deliver the most excellent results. This doesn’t always happen. That’s why it’s important to do your due diligence before committing to the right company.
Contact Ultimate Roofing for any roofing projects you might have and in need help with!
A roofing project is not a job for the DIY enthusiast or the dad who thinks he can fix everything. A repair on your roof needs assistance from a professional and that means you’ll need to hire a roofing contractor for it. From minor seasonal repairs to major roof replacements, professional companies are required to get the job done in the most effective manner.
But should you hire the first company you find in your hunt for roofers just like that? Not really. There are plenty of questions you need to prod upon before your sign the contract. Here are some:
1. Will my old roof be removed?
Most homeowners have the idea that professional companies will get rid of the old worn out roof shingles before installing a new one. But this doesn’t always happen. In fact it’s very common to come across a company that will make things easier for themselves and plant a new roof on top of your old one. This is poor quality work that can have an effect on the life span and function of your newly installed roof. So it’s important to double check with them about their plans with your old roof.
2. Are drip and metal edges going to be used on my new roof?
Drip or metal edges are handy pieces of aluminum that protect your roof from leaks and water damage. This piece of metals is used to stabilize shingles that have come off and it overhangs to help direct water to the gutter nearby. Without these important pieces of metal, you could face major water damage so it’s best to inquire about it with your potential company.
3. Will the company use an appropriate number of nails for each shingle?
Usually around four nails per shingle are used and driven into the nail line. Perhaps more can be used in places where the roof is too steep. But anything less or too much than the appropriate limit can damage your shingles and therefore your roof. It’s also important to ensure that the nails are driven properly and in the given nail line. You could ask the Albany roofer about the way they intend to place nails in the shingles before you hire them.
Contact Ultimate Roofing for all your local Albany roofing needs today!
Suppose a storm just hit town and you notice the ceiling of the attic drip. What do you do? Call a professional roofing company of course. Simple as that…or is it?
The actual process of signing a deal with a credible company and starting work is no big deal but it’s the period of the work and the final outcomes that can make or break your entire experience of hiring someone.
If you don’t want to end up disappointed by your choices, there are certain key things you need to avoid at all costs. Here are some things to not do when hiring a company.
Do NOT go with Door-to-Door Companies
We have seen and heard of many roofers that seem to pop up from nowhere all of a sudden when a crisis such as a bad storm hits town. These roofers will go door to door offering their services to fix your damaged roof. While the offer seems quite attractive and convenient, this is the road you’d probably want to keep clear from. These companies are often not licensed, have no physical location where you can reach out to them in the future and have no evidence of their skills. There’s little to research on these specific businesses as well so you won’t be able to find any customer reviews on them easily either.
The best strategy we recommend is to wait until the harsh winds pass and hire a proper, licensed roofer in Albany with solid credentials and someone you can seek out in the future if there are more problems with your roof.
Don’t Forget to Do Prior Research
As mentioned over and over again, research is imperative before hiring a company. This means you need to find out whether the roofer you’ve set your eyes on is licensed, insured, has good client feedback and reputation, and offers warranties.
Don’t Take Your Contract For Granted
The long dull paperwork can be boring to just about anyone but if you’re the homeowner, you need to keep your eyes peeled. Don’t skim over the paperwork and read the contract fully. Check whether everything is insured, how they will replace the roof, what the policies are in case of unforeseen accidents and damages, how payment is collected and then schedule your roofing work as expected.
Looking for help with your roof? Call Ultimate Roofing today!
Installing a new roof is one of the major aspects of your home construction or renovation. Every homeowner who embarks on a roof building project desperately wants a roofing system that can last for 20 to 30 years. In this passage, we will be looking into four important factors that need to be taken care of while installing a new roof.
Superior roofing materials
Superior roofing materials can offer maximum protection from the effects of natural elements. The 4 main factors that need to be checked while comparing different types of roofing materials are listed below.
For identifying the fireproof nature of different roofing materials, they are generally graded into three categories (A, B, and C). Grade A represents roofing materials that offer maximum protection against heavy exposure and grade C represents protection against light fire exposure. Roofs made of untreated wooden materials are not applicable for such ratings.
Load bearing capacity
For a roof that can bear heavy loads, you would need a strong substructure made of superior quality frames. Installation of such roofing systems can be comparatively costly and time-consuming.
The lifespan of your roof depends on the type of materials used. For instance, cedar roofing can last up to 30 years, whereas roofs made of laminate shingles can last around 25 years.
Always use durable materials that offer the best protection against the elements like rain, snow, winds, sleet, and hail.
Proper installation technique
For installing your expensive roofing materials, you need to hire a professional roofer. Proper installation is essential for a durable roofing system.
It is best to choose a roofing contractor in Albany that enjoys a good reputation. You can verify this by checking customer testimonials and comparing the ratings provided by online review sites like HomeStars. You can also refer to their BBB (Better Business Bureau) profile.
Reputed roof installers provide Workers’ Compensation insurance in addition to General Liability insurance. Established companies would also offer workmanship warranties.
For preventing damages from moisture and heat, you need to make arrangements for proper attic ventilation system. This is essential for protecting your roofing structures and insulation system.
For waterproofing your expensive roofing structures, you need to install flashings around chimneys, skylights, and vents. This is to prevent water leakage. During a roof installation, your roofer can use the old flashings if they haven’t sustained any damage. Additional caulking might be needed to offer better prevention.
Knowing the areas that can cause damage to your new roof can help you in finding the best roofing materials and a reliable roofer.
Looking for a professional company to help out on your project? Call Ultimate Roofing today!
Ultimate Roofing is a well-established roofing company serving Albany New York and the Greater Capital Region. We proudly offer both